Electrical thermal imaging is a non-invasive diagnostic technique that identifies faults that the naked eye can’t see. Using infrared cameras, our certified electricians can visualise and quantify changes in the surface temperature of electrical equipment. The scanner works by converting infrared radiation (heat) emitted from the surface of electrical equipment into electrical impulses, which are mapped as colours that represent the various temperatures.
To prevent overheating in your switchboard, arrange a thermal imaging electrical inspection tag from Voltec Maintenance and contact us today.
Before an electrical component burns up, it heats up. Early detection with infrared thermal scanning detects growing problems before they cause a system failure or even an electrical fire. Therefore, thermal imaging should be carried out every 12 months by a qualified electrician, so that any problems can be corrected before the component fails. Furthermore, if your building is situated where environmental factors are prevalent, it is highly recommended that testing should occur more frequently.
Need more information on appliance electrical testing and thermal scanning frequency for your industry? Contact us today to arrange an electrical inspection test and tag.
At Voltec Maintenance, we offer routine thermal scanning of electrical switchboards found within the workplace as part of an annual electrical maintenance program. Firstly, our team will inspect your premises using an infrared thermal imaging camera through which we’re able to detect infrared radiation. This allows us to diagnose any potential hazards within an asset’s electrical infrastructure and make recommendations on how to keep that asset functioning safely and effectively. After the initial thermographic survey, our team will provide you with a detailed thermographic inspection report that describes:
Unlike when things go wrong, a thermal imaging inspection causes no disruption to your workplace. Inspections can be carried out while the building is operating normally, without the need to disrupt your power supply.
Have you had your building inspected with thermal imaging recently? If it’s been over 12 months since your last inspection, be sure to book in your next round of testing as soon as possible. Contact Voltec Maintenance today.